Wind-Up Digital Multimeter 

Never have a dead battery in your Digital Multimeter when you really need it!

Leave in your vehicle or toolkit & simply spin the crank 10 seconds for 10 minutes of use!

Do you ever find yourself needing a multimeter, which you know you have somewhere and when you find it the batteries are flat? Well never again, this new product has no batteries so you can leave it as long as you like, simple wind the handle 2-3 times for about 2 mins use, winding for about 10 seconds will give about 10 minutes of use. This high quality extremely well equipped digital multimeter w/ all the features and functions required for general use will never have a dead battery.

General Specifications

Display: 46 x 23mm large LCD display

Measurement: AC, ACA, DCV, DCA, ohms, continuity beeper, Hz %, capacitance, diode, data hold.

Range selection auto ranging with manual selecting

Data hold to freeze the display reading

Dimensions 152 x 78 x 45 mm

Weight 350 g

Includes Red and Black test leads plus instruction m

Electrical Specification

• D/C voltage: Range Volts 400.0 my - 1000 v D/C; Accuracy +/- (1% + 3d); Input impedance 10 M ohm
• D/C & A/C current: 10 A – 400 uA; Overload Protection Fuse
• Ohms: 400-40 M ohm
• Capacitance: 40nF-100 uF
• Frequency: 4Hz-4MHz
• Diode (forward voltage, VF); Range 4V DC; Test voltage 1.6 v DC; Test current 1 +/- 0.6 amps
• Continuity beeper: beep if measured resistance less than 100 ohm; response time < 100 ms