Browse Categories

Sterling Power Pro Charge Ultra Plus : 12 Volt, 30 Amp Marine Battery Charger : 3 Bank Battery Charger


Price: $518.00
In Stock
Item Number: PCU1230 plus
Manufacturer: Sterling Power
Manufacturer Part No: PCU1230 plus

ProCharge Ultra Plus- The Ultimate Battery Charger

12 VOLT, 30 AMP ADVANCED BATTERY CHARGER, SECOND GENERATION UPGRADE


New for 2022, our second generation updated line of Marine Grade, Power Factor Corrected Battery Chargers set a new standard of what you should expect from your battery charger when it comes to features, performance & price. Years of experience in the battery charging industry has provided us the insight to include everything we could possibly think of and combine it all into the ProCharge Ultra Plus line of feature rich, high performance marine grade battery chargers. This exceptionally efficient power factor corrected battery charger runs on any Global AC Power source between 80-270 volts, requires less input power, produces less heat and noise waste, while still retaining a remarkably small, lightweight footprint. Did we mention Eleven pre-programmed battery charging curves as well as 4 user customizable battery profile for Lead Acid or Lithium Batteries? Adjust absorption time and custom set charge, float voltages and ) DegC temp trip protection. Optional BMS signal & optinal positive signal feed to bring all the custom settings you need to your next project. The digital dispaly allows easy checking of real time voltage or current output on the face of the charger or use the optinonal multi-lingual remote control that can be either surface, recess, or flush mounted over 30 feet away from the battery charger. 

The ProCharge Ultra has been recently Updated to a 2nd Generation. The ProCharge Ultra Plus has a few new features:

Page 9, 10 and 11 of the new PCU manual cover the new optional Auxiliary Control Cable and the new Adjustable Absorption Time Window and the Easy Access tabs for the bottom cover.

The Auxiliary control cable allows for 2 things:

BMS shut down, if the red cable is grounded to 0V the PCU stops charging – in operation the red cable sits at 12V. So, if someone has a BMS that sends a ground signal then this can be used. If the BMS sends a positive signal a relay is required between the red and black wire

(i.e. short pos and neg to turn PCU off)

The purple cable is not really for battery charging at all – it is for a signal to turn something on. Notably a PSR, for example, you would feed the purple cable to the PSR to turn the PSR on to allow for the PCU to charge up all the batteries within a system using all of the pre-existing cable / fuses to save having to re-run new cabling. Also, if people don’t wish for a BB to turn on, they can feed that purple cable in to BMS port on the BB Ultra (for example).

Other new PCU differences:

Custom lithium charging profiles, as lithium batteries are newish to the market, there is all sorts of opinions about charge voltages and absorption time lengths. Here you can just customise absorption, float and absorption time length.

Additionally, We’ve put tabs on the side of the red end cap. Historically, if people lost the screws that hold the end caps down, the end cap could fall off. Now, with the tabs, it shall be held on with tabs + screws.


A One Page Summary Sheet of our New ProCharge Ultra Plus Battery Chargers- The Ultimate Battery Charger:

http://www.sterling-power-usa.com/library/Sterling Power USA - ProCharge Ultra Plus Battery Charger Product Sheet.pdf


 

Full Installation / Owners Manual for our ProCharge Ultra Plus Line of Battery Chargers:

http://www.sterling-power-usa.com/library/New_ProChargeUltra_Plus_Instructions.pdf

  

What size of charger do I need?
Most companies recommend a battery charger to be about 10% of the amp hour capacity of the batteries requiring to be charged. Sizing a charger to 15% to 20% of the amp hour capacity is the sweet spot and will result in a faster charge time. However, if you have a generator set onboard and you wish to charge your batteries faster - ie, to save fuel, then depending on your budget, you can easily add more charging current or multiple chargers to reach 30% rule of thumb of the charger size matching the battery amp hours to reduce your generator running hours and achieve even faster charge times.

 

Larger requirements?
After your final calculations are made if you require a larger charger please note because they are digital chargers, the Sterling Power ProCharge Ultras can be added together. Simply install a second or third charger as if the first charger wasn’t there. They will work great together in parallel.  For larger requirements simply add as many units together as needed to meet your largest of amperage requirements. Additionally, sometimes multiple smaller units can offer some advantages over 1 larger unit: They tend to be lower cost, have a built in redundancy, (in event of one failing) and enables you to switch one off in the event of low shore power facility.  

 

 

Power Factor Correction
Power efficiency of the Pro Charge Ultra is significantly higher than its predecessors. The PCU runs at >90% efficiency and the power factor is rated at 0.99PFC this is in contrast to a non-PFC charger which runs at approximately 65% efficiency. Thus, the same power output with a reduced power input saving you money on kilowatt-hours. Other major benefits of PFC allows the unit to run off a dirty / modified / quasi sine wave from a generator (example). The other advantage of this technique is less heat is liberated during operation, therefore reduced use of fan and stress on the electronic components.

 

Synchronized Rectification
Modern, synchronized rectification with MOSFET technology makes the Pro Charge Ultra Series 9% more effective. Less heat liberated and increased efficiency are also features of this latest technology.  Boasting an elegant yet functional design. The Pro Charge Ultra housing was designed by a renowned American product designer. In the foreground stands optimal function and clean lines. The housing is made of plastic and the back is made of well protected metal plate with the latest corrosion coatings, all other metal fixtures and fittings are stainless steel or nonferrous.

 


11 preset charging algorithms & 1 custom sett
ing
The Pro Charge Ultra has 11 different charging characteristics for corresponding types of batteries: Gel, AGM, sealed, open, calcium, LiFePO4. If these should not suffice there is 1 customizable setting which the user can set themselves - simply enter the absorption time, charge and float voltages then press enter and the settings save.

 

Automatic Desulphation / Equalization
Every 7-10 days the Pro Charge Ultra undertakes a desulphation / equalization and anti-stratification program which keeps your batteries young and rejuvenated.  

 


Performance monitoring LED bar
A bar of LEDs display the percentage to which the Pro Charge Ultra battery charger is operating at. This is easily and quickly recognized at a glance and can be easily analyzed.

 

32 LED display
32 LEDs built into the front panel provides all the necessary information about the charger including: charging status, battery chemistry select, temperature and voltage warnings along with many others.


Redundant high voltage protection device
In the event of a failure of the main processor this unit provides another safety system to shut off the device. Doubling the levels of security.

 

Variable Fan speed
The internal temperature of the device ultimately runs the speed of the fan. This guarantees a minimum possible noise. So called ‘thermostatically controlled force draft cooling’


Programmable Power Reduction

The Pro Charge Ultra can also charge with variable performance levels. The following performance levels available are: 100%, 75%, 50% & 25%. This can be controlled via the front panel or via programming the remote control. Power reduction is often used if the power supply to the charger is inadequate (e.g. small generator) but still enables competent levels of battery charging. Another benefit of power reduction is to reduce fan noise, as less heat is liberated.

 

Three Isolated Charge Outputs 
The Pro Charge Ultra has 3 isolated charging outputs. 3
batteries or battery banks can charge without the batteries themselves being interconnected, e.g. Starter, domestic and generator starter battery. Thru battery resistance the charger can adjust on the fly and send full current capacity of the charger down one output, or it can spread the current output across all banks if the batteries are empty it senses resistance and makes output decisions.

 


Small, lightweight and powerful

The Pro Charge Ultra series is characterized by its very compact, low
weight and small footprint structure. 

 

Voltage + Current LED display
2 LED matrix displays. The left matrix displays the voltage output from the charger and the right matrix displays the current leaving the charger.

 

Splash protection
For vertical mounting, the unit has drip water protection. The protection class is IP22. It meets the requirements of the ABYC drip test.

 

Global Application
The Pro Charge Ultra will operate with AC voltages ranging from 80V-270VAC (40- 70Hz) and DC voltages of 130-320VDC.

 

 

New features on this product surpassing that of standard battery chargers include:

1) 11 pre-programmed battery curves including: Open/Sealed lead acid, AGM, Gel, LiFePO4.
2) 1 custom set, can be set from charger, unlike our competitors there is no need for a computer to do this operation, all can be done from the front panel.
3) 2 x digital meters for current and voltage measurement and a 32 LED information display.
4) 1 x power meter to show what reserve power left in the unit.
5) PFC, active, up to 0.99 PF, ensuring efficient power conversion, up to almost 90% as opposed to about 60% for older, non-PFC technology.
6) % power reduction to allow unit to work with restricted power available (available on local control or remote control panel).
7) De-sulphation auto cycle built in to software.
8) New, low activity, standby mode to increase battery life.
9) Battery health program every 7-10 days .
10) Multiple speed fan control. This reduces unnecessary fan noise experienced by the customer, even though the new extreme efficiency reduces the need for fans. At high ambient temperatures (40-50 deg C), however, fans would still be required to ensure operation.
11) Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
12) 32 LED information panel to ensure maximum information transmitted to owner.
13) Internal scan and systems check to ensure product is okay.
14) Remote control option.
15) Small footprint and light weight.
16) Include battery temperature sensor to give temperature compensation and high temp trip.
17) As with all our marine chargers all metals used are non-ferrous or heavily protected, so no corrosion.
18) New synchronized rectification output as opposed to diode output, giving up to an extra 9% efficiency.
19) Conforms to ABYC drip test, is waterproof from water directly dropped on to the top of the unit (+/ - 17 deg) if installed correctly (vertically).
20) Thermostatically controlled force draft cooling.
21) The printed circuit boards are conformal coated for high humidity and salt air operations.

 

Remote Control (optional) 5m of cable
With the optional remote control many features can be operated from a distance and all important information can be read. The remote control can be used both as an installation or attached as a mounted unit.

Information from the remote control
 Charging voltage (V) and charge current (A)
 Charging stage and duration
 Configured Battery Type
 Temperature of the charger
 Temperature of the battery
 Error Messages

Pro Charge Ultra front panel

Local Information Center

32 x LED display panel

2 x LED digital meters

1 x digital power meter

 

12V / 60A model, all other units pro rated

Input Voltage range

80 - 270V  40 - 70Hz

Power Factor at 230V

 0.976

Efficiency

90.4%

Full load current (110 / 230V)

9.8 / 4.6 Amps

Total Harmonic Distortion

2.4% Voltage

Total Harmonic Distortion

2.4 % Current

Ripple noise (R.M.S.)

14mV

Ground Leakage

0.5mA

 

Generator / mains power required to run unit (watts). We recommend doubling these figures for the power required to crank the PCU up from a cold start.

12V

20 amp

approx

350 watts

700W generator due to start up

12V

30 amp

approx

500 watts

1000W generator due to start up

12V

40 amp

approx

600 watts

1200W generator due to start up

12V

50 amp

approx

750 watts

1500W generator due to start up

12V

60 amp

approx

900 watts

1800W generator due to start up

24V

20 amp

approx

600 watts

1200W generator due to start up

24V

30 amp

approx

900 watts

1800W generator due to start up

36V

20 amp

approx

900 watts

1800W generator due to start up

48V

15 amp

approx

900 watts

1800W generator due to start up

Voltmeter accuracy     +/- 1%

Ammeter accuracy      +/- 1%

 

Pro Charge Ultra AC Input 80 - 270V  (40 - 70Hz)

DC Voltage

Amps

Number of outputs

Size L x W x D mm

Weight Kg

Part number

12

20

3

260 x 215 x 90

2.0

PCU1220

12

30

3

260 x 215 x 90

2.0

PCU1230

12

40

3

260 x 215 x 90

2.0

PCU1240

12

50

3

315 x 215 x 90

3.0

PCU1250

12

60

3

315 x 215 x 90

3.0

PCU1260

24

20

3

260 x 215 x 90

2.0

PCU2420

24

30

3

315 x 215 x 90

3.0

PCU2430

32

20

3

315 x 215 x 90

3.0

PCU3220

36

20

3

315 x 215 x 90

3.0

PCU3620

48

15

3

315 x 215 x 90

3.0

PCU4815

Remote control + 10m cable

110 x 68 x 20

0.05

PCUR

French Label - Sticker for PCU

PCULF

German Label - Sticker for PCU

PCULG

Spanish Label - Sticker for PCU

PCULS

For larger current requirements simply add 2 or more units together.

  

5 Year Warranty: 

With our years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger.  However, do not take our word for it.  This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and Victron plus others).  It was described as "this has to be the most flexible marine charger on the market today".  Similarly, the Pro Charge Ultra won the innovation award at IBEX 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra was originally released into the market.

 Sterling Power is honored to be awarded the 2011 Pittman Innovation Award in the Systems Category for the ProCharge Ultra line of Marine Grade Battery Chargers. We are proud to rank among industry leaders in the RV and Marine battery charging market.

2011 Pittman Innovation Award Press Release     

 

September 2010 Sailing Today article- Multi-Stage Marine Battery Charger Review and Comparison of 9 brands of marine battery chargers. How does Sterling Power's New ProCharge Ultra line of marine battery chargers rank among the industry leaders in RV and Marine battery charging market? Read the marine battery charger review & find out:

Sailing Today September 2010 Marine Battery Charger Review & Comparison     

  

A One Page Summary Sheet of our New ProCharge Ultra Plus Battery Chargers- The Ultimate Battery Charger:

http://www.sterling-power-usa.com/library/Sterling Power USA - ProCharge Ultra Plus Battery Charger Product Sheet.pdf

 

Quick video on the Sterling Power ProCharge Ultra, Shore Power Battery Charger:


Read this comprehensive article reviewing the installation of a Sterling Power ProCharge Ultra. This article was written by RC Collins of Compass Marine Inc. Images in this .pdf are copyright of Compass Marine Service.